B+K Precision BK251x Series 60 and 100MHz, 1GS/s Handheld Oscilloscopes
EOL/obsolete, not available anymore
Benefits
- 32 automatic measurements.
- Built-in 6000-count versatile digital multimeter/DMM.
- Dedicated current measurement terminals.
B+K Precision BK251x Series 60 and 100 MHz, 1 GS/s Handheld Digital Storage Oscilloscopes
The B+K Precision BK251x series are handheld digital storage oscilloscopes that provide floating measurement and recorder capabilities with a built-in digital multimeter (DMM), all in one portable and lightweight package. These versatile 60 and 100 MHz bandwidth scopes offer 1 GS/s sample rates, 2 Mpts waveform memory, 32 automatic measurements, and multiple recording functions to capture transient or long-term signal behavior. The BK251x series allows engineers and technicians to make accurate and safe measurements when the signal reference is floating.
- Handheld oscilloscopes with 60 or 100 MHz bandwidth.
- 1 GS/s sample rate.
- Isolated 1000 V CAT II/600 V CAT III input channels.
- 2 Mpts deep memory.
- 32 automatic measurements.
- FFT plus four additional math functions.
- Built-in 6000-count DMM measures DC/AC voltage, DC/AC current, resistance, capacitance, diode, and continuity test.
- Dedicated current measurement terminals.
- Recorder and trend plot functions to log data.
- Hardware frequency counter 1 Hz, DC coupled, 10 Hz to max. bandwidth.
- USB host port for convenient storing and recalling of waveform data, setups, and screenshots on a USB flash drive.
- Standard mini-USB device port for remote PC control.
- PC software that lets you remotely control the oscilloscope and capture, save, and analyze waveform data.
Model Overview
Model | Bandwidth | Sample rate | Memory depth | Channels | Safety Rating | Typical application |
BK2515 | 60 MHz | 1 GS/s (half-channel interleaved), 500 MS/s (per channel), 8 bit resolution |
40 kpts (half-channel interleaved), 20 kpts (per channel) |
2 isolated | 1000 V CAT II, 600 V CAT III | Power electronics and industrial |
BK2516 | 100 MHz | 2 isolated | 1000 V CAT II, 600 V CAT III | Power electronics and industrial |
Included: Handheld oscilloscope BK 2515, or 2516, user manual, passive probes (one per channel), pair of DMM test leads, 7.4 V Li-ion battery BP2510, USB cable, probe compensation connector, AC power adapter, travel case LC2510B and certificate of calibration.