We use cookies in order to guarantee the best possible service. If you continue browsing the site you consent to our cookie use.

Expert eX remote-I/O and datacom modules

eX/Expert Series

  • Remote-I/O and remote sensor modules.
  • Remote relay and remote control modules.
  • Interface converters and datacom modules.

Analog inputs/outputs, temperature sensors

Series Versions Channels Sampling Description MODbus Ethernet RJ45, TCP/IP
eX-9015 eX-9015
eX-9015H
eX-9015H-M
6 Analog inputs, RTD 16 bit, 12 S/s Isolation up to 3000 VDC. Differential inputs for RTD: Pt, Ni, Cu (2/3/4-wire) or models -MTCP for PT100, PT1000, Balco 500, Ni 604, Ni1000; break line detection, individual channel configuration. Watchdog.
"Non -H models": Parity setting (none/even/odd), rejection 60 Hz.
"-H models": Rejection 50 Hz/60 Hz
-M -MTCP
eX-9015-MTCP 7
eX-9033 eX-9033
eX-9033P
3 Analog inputs 16 bit, 12 S/s Isolation up to 3000 VDC. Differential inputs for RTD: Pt, Ni, Cu (2/3/4-wire). Watchdog, break line detection.
Models -P with individual channel configuration.
-  -
eX-9036 eX-9036
eX-9036P
6 Analog inputs 16 bit, 12 S/s Isolation up to 3000 VDC. Differential inputs for RTD: Pt, Ni, Cu (2/3/4-wire). Watchdog, break line detection.
Models -P with individual channel configuration.
-  -
eX-9017 eX-9017
eX-9017-M
eX-9017F
eX-9017F-M
eX-9017R
eX-9017FR
eX-9017H-M
8 Analog inputs, U/I 16 bit, 10 S/s, 10 Hz;
-F: 16/12 bit, 10/60 Hz
Isolation up to 3000 VDC. Differential inputs for voltage (±150 mV/±500 mV/±1 V/±5 V/±10 V) or current (±20 mA). Watchdog.
Models -R with over voltage protection 240 VRMS.
Models -H with individual channel configuration
Model -MTCP additional 2 digital output (open collector, NPN, load max. 30 V/500 mA)
-M -MTCP
eX-9017-MTCP
eX-9018 eX-9018
eX-9018-M
eX-9018BL
eX-9018 BL-M
8 Analog inputs, TC/U/I 16 bit, 10 S/s, 10 Hz Isolation up to 3000 VDC. Differential inputs for thermocouples J, K, T, E, R, S, B, N or voltage (±15 mV/±50 mV/±100 mV/±500 mV/±1 V/±2,5 V) or current (±20 mA, with 125-Ω-Widerstand).
Models -BL with break line detection
-M  -
eX-9019 eX-9019
eX-9019-M
8 Analog inputs, TC/U/I 16 bit, 10 S/s Isolation up to 3000 VDC. Differential inputs for thermocouples J, K, T, E, R, S, B, N or voltage (±15 mV/±50 mV/±100 mV/±500 mV/±1 V/±2.5 V) or current (±20 mA, with 125-Ω-resistance). Individual channel configuration. Break line detection -M -
eX-9021 eX-9021
eX-9021P
1 Analog output, U/I 12 bit
-P: 16 bit
Output for voltage (0...10 V) or current (0...20 mA/4...20 mA) - -
eX-9022 eX-9022 2 Analog outputs, U/I 12 bit Outputs for voltage (0...10 V) or current (0...20 mA/4...20 mA) -  -
eX-9024 eX-9024
eX-9024H-M
4 Analog outputs, U/I 14 bit Outputs for voltage (0...10 V, ±10 V, 0...5 V, ±5 V) or current (0...20 mA/4...20 mA).
Model -H: Isolation up to 3000 VDC. Individual configuration of output range; additional 4 single-ended digital inputs, isolated up to 3750 VRMS; level 0/1 max. 1 V/10...30 VDC
-M  -

Digital-I/O, Relay, Counter

Series Versions* Channels** Description MODbus TCP/IP
eX-9041 eX-9041D
eX-9041D-M
14 DI Single-ended. Isolation (commmon source) up to 3750 VRMS. Level 0/1 max. +1 V/4...30 V. Watchdog -M -
eX-9042 eX-9042D
eX-9042D-M
13 DO Open collector. Isolation (commmon power) up to 3750 VRMS. Load max. 30 V/100 mA -M -
eX-9043 eX-9043D
eX-9043D-M
16 DO Open collector. Load max. 30 V/100 mA. Watchdog -M -
eX-9044 eX-9044D
eX-9044D-M
4 DI, 8 DO Inputs single-ended. Isolation (commmon source) up to 3750 VRMS. Level 0/1 max. +1 V/4...30 V.
Outputs open collector. Isolation (commmon power) up to 3750 VRMS. Load max. 30 V/375 mA. Watchdog
-M -
eX-9050 eX-9050HD
eX-9050HD-M
eX-9050AHD
eX9050AHD-M
8 DI, 8 DO Inputs single-ended source (or models -A: Sink). Level 0/1 max. +1 V/4...30 V.
Outputs open collector NPN (or models -A: PNP). Load max. 30 V/30 mA.
Watchdog
-M -MTCP
eX-9050-MTCP 12 DI, 6 DO Isolation up to 3000 VDC.
Inputs dry contact; 1 kHz; level 0/1 close to GND/open; inputs support counter/frequency/latch.
Outputs open collector NPN, load max. 30 V/500 mA; outputs support 1 kHz pulse output
eX-9051 eX-9051D-M 16 DI Single-ended. Isolation (commmon source) up to 3750 VRMS. Level 0/1 max. +4 VDC/10...50 VDC. Watchdog -M -MTCP
eX-9051-MTCP 12 DI, 2 DO, 2 CNT Isolation up to 3000 VDC.
Inputs dry contact; 1 kHz; level 0/1 close to GND/open. Counter/frequenz/latch 4.5 kHz.
Outputs open collector NPN, load max. 30 V/500 mA
eX-9052 eX-9052D
eX-9052D-M
8 DI Isolation 5000 VRMS. 6 differential, 2 common ground. Level 0/1 max. 1 V/4...30 V. Watchdog -M  -
eX-9053 eX-9053D
eX-9053D-M
16 DI Level 0/1 max. 2 V/4...30 V. Watchdog -M -MTCP
eX-9053-MTCP 12 DI, 4 DO Isolation up to 3750 VRMS.
Inputs dry-/wet-contact; level 0/1 close to GND bzw. 0...2 VDC/open bzw. 5...30 VDC.
Inputs support counter/frequenz/latch. Outputs isolated, open collector NPN, load max. 5...30 V/500 mA; outputs support 500 Hz pulse output
eX-9055 eX-9055D-M 8 DI, 8 DO Inputs single-ended sink/source. Isolation (commmon source or common GND) up to 3750 VRMS. Level 0/1 max. +4 VDC/10...50 VDC.
Outputs open source N-MOSFET. Isolation up to 3750 VRMS. Load max. 10...40 VDC/650 mA
-M -MTCP
eX-9055-MTCP 8 DI, 8 DO Isolation up to 3000 VDC.
Inputs dry-/wet-contact; 1 kHz; level 0/1 close to GND bzw. 0...2 VDC/open or 5...30 VDC.
Inputs support counter/frequenz/latch. Outputs P-MOSFET (open drain), load max. 30 V/1 A; outputs support 1 kHz pulse output
eX-9060 eX-9060D
eX-9060D-M
4 DI, 4 REL Inputs isolation (common source) 3750 VRMS. Level 0/1 max. 1 V/4...30 V.
Relays 2x type A, 2x type B; surge strength 500 V, operate/release time 3 ms/2 ms. Watchdog
-M -MTCP
eX-9060-MTCP 5 DI, 3 REL Inputs isolation up to 3750 VRMS. Single-ended with common source/GND; dry-/wet-contact; level 0/1 close to GND or max. 2 VDC/open or 4...30 VDC. Inputs support 500 Hz counter.
Relays 1x type A, 2x type B; surge strength 500 V, operate/release time 3 ms/2 ms
eX-9063 eX-9063D
eX-9063D-M
eX-9063AD
eX-9063AD-M
eX-9063BD
eX-9063BD-M
8 DI, 3 REL Inputs isolation (common source) 3750 VRMS. Level 0/1 max. 1 V/4...30 V. Watchdog.
Models -D/-D-M: Relays 5 A at 250 VAC/30 VDC.
Models -AD/-AD-M: AC-SSR (solid state relays) normal open, load 24...265 VRMS.
Models -BD/-BD-M: DC-SSR (solid state relays) normal open, load 3...30 VDC
-M -MTCP
eX-9063-MTCP 7 DI, 3 REL Inputs isolation up to 3750 VRMS. Single-ended with common source/GND; dry-/wet-contact; level 0/1 close to GND bzw. max. 2 VDC/open bzw. 4...30 VDC. Inputs support 500 Hz Counter.
Relays 3x type A; surge strength 4000 V, operate/release time 6 ms/3 ms
eX-9065 eX-9065D
eX-9065HD
eX-9065HD-M
eX-9065AD
eX-9065AHD
eX-9065AHD-M
eX-9065BD
eX-9065BHD
eX-9065BHD-M
4 or 5 DI (-H), 5 REL Inputs isolation (common sources) up to 3750 VRMS. Level 0/1 max. 1V/4...30 V. Relays 3x type A; surge strength 4000 V, operate/release time 6 ms/3 ms
Models -D/-HD/-HD-M: Relays 5 A at 250 VAC/30 VDC.
Models -AD/-AHD/-AHD-M: AC-SSR (solid state relays) normal open, load 24...265 VRMS.
Models -BD/-BHD/-BHD-M: DC-SSR (solid state relays) normal open, load 3...30 VDC
-M  -
eX-9067 eX-9067D 7 REL Relays 7x type A; surge strength 1500 V, operate/release time 5 ms/2 ms; contact rating 0.5 A at 120 VAC, 1 A at 24 VDC -M  -
eX-9068 eX-9068D-M
eX-9068AD-M
8 REL -D-M: Relays 8x type A; surge strength 1500 V, operate/release time 5 ms/2 ms; contact rating 0.5 A at 120 VAC, 1 A at 24 VDC
-AD-M: 8x PhotoMOS type A; isolation voltage 5000 VAC; turn-on/off time 0.7 ms/0.05 ms; output ratings max. 0...350 VAC (peak), max. 0...0.13 A (peak)
Watchdog
-M -
eX-9080 eX-9080R
eX-9080R-M
eX-9080RD
eX-9080RD-M
2 DO, 2 CNT Outputs open collector, max. load 30 V/30 mA;
Counter isolated (3750 VRMS) or non-isolated; level isolated 0/1 max. +1 V/3.5...30 V, level non-isolated 0/1 0...1 V/3.5...5 V; max. count 32 bit (4,294,967,295); frequency measurement max. 1 Hz...100 kHz
-M  -

Interfaces, Converters, Repeaters

Series Versions USB RS232 RS422 RS485 Isolation Repeater Converter Other specs

eX-9510

eX-9510 - - - - Min. 3000 VDC isolation; serial rates up to 115.2 kbps; distance up to 1200 m
eX-9510A - - -
eX-9520 eX-9520(+) - - RS232 - 3000 VDC isolation; serial rates 300..115.2 kbps; max. 256 modules in an RS485 network without repeater; power supply unregulated 10...30 VDC, all versions also availabe as option "+" with unregulated power supply 9...48 VDC
eX-9520A(+) - RS232 -
eX-9520R(+) - - RS485 -
eX-9520AR(+) - RS422/485 -
eX-9530 - USB1.1; RS232 RTS and CTS supported; min. 3000 VDC isolation; serial rates up to 115.2 kbps; drivers for Windows and Linux
eX-9531 - - USB1.1; RS422 RTS and CTS supported; min. 3000 VDC isolation; serial rates up to 115.2 kbps; drivers for Windows and Linux

* Models -D with status LEDs or for model eX-9080 4½ digit LED.
** AI = analog input, AO = analog output, DI = digital input, DO = digital output, REL = relay or SSR (solid state relay), CNT = counter.


Couldn't find the desired product in the shop? Just ask us - more products available!