Accessories for the Copper Mountain Series VNAs

min Quantity
1 piece
Unit price
base price
Variants
technical Question?
recommend by email
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Files/Downloads

Accessories: Adaptors and Calibration for the Copper Mountain VNA Series

Model Overview

Adaptors
ModelDescription
PNMDF3.5F adaptorNMD 3.5 mm female to 3.5 mm female, frequency range up to 26.5 GHz, impedance 50 Ω
NF50 adaptorN female to N female, frequency range up to 6 GHz, impedance 50 Ω
NM-SF adaptorN male to SMA female, frequency range DC...18 GHz, impedance 50 Ω
NM-SM adaptorN male to SMA male, frequency range DC...18 GHz, impedance 50 Ω
NF-SM adaptorN female to SMA male, frequency range DC...18 GHz, impedance  50 Ω
NF-SF adaptorN female to SMA female, frequency range DC...18 GHz, impedance 50 Ω
2.4F-2.9F adaptor2.4F to 2.9F, frequency range DC...40 GHz, impedance 50 Ω
24F-24F adaptor24F to 24F, frequency range DC...50 GHz, impedance 50 Ω
Automatic calibration modules
ModelDescriptionDatasheet
ACM2506Automatic calibration module, frequency range 20 kHz...6.5 GHz, impedance 50 Ω
ACM2509Automatic calibration module, frequency range 20 kHz...9 GHz, impedance 50 Ω
ACM2520Automatic calibration module, frequency range 100 kHz...20 GHz, impedance 50 Ω
ACM4509Automatic calibration module, frequency range 100 kHz...9 GHz, impedance 50 Ω
ACM4520Automatic calibration module, frequency range 100 kHz...20 GHz, impedance 50 Ω
Mechanical calibration kits
ModelDescription
N1.2 calibration kitFrequency range up to 1.5 GHz, impedance 50 Ω, connector: N-type
N611 calibration kitFrequency range up to 6 GHz, impedance 50 Ω, connector: N-type
N612 calibration kitFrequency range up to 6 GHz, impedance 50 Ω, connector: N-type
N911 calibration kitFrequency range up to 9 GHz, impedance 50 Ω, connector: N-type
P911 calibration kitFrequency tange up to 9 GHzm impedance 50 Ω, connector: 3.5 mm female. For use with the IoTest Kit only!
N912 calibration kitFrequency range up to 9 GHz, impedance 50 Ω, connector: N-type
Z5411 calibration kitFrequency range up to 50 GHz, impedance: 50 Ω, connector: 2.4 mm female
N1801 calibration kitFrequency range up to 18 GHz, impedance 50 Ω, connector: N-type
S911T calibration kitFrequency range up to 9 GHz, impedance 50 Ω, connector: 3.5 mm female
T4311 calibration kitFrequency range up to 40 GHz, impedance 50 Ω, connector: 2.92 mm female
S2611 calibration kitFrequency range up to 26.5 GHz, impedance 50 Ω, connector: 3.5 mm female
WR-05 calibration kitWaveguide calibration kit, 140...220 GHz, impedance 50 Ω, consists of one fixed short, one fixed matching load, waveguide shims, two waveguide quick connects, ten 3/32 hex head waveguide screws, six 3/32 hex head extended waveguide screws, four alignment dowel pins, a 3/32” hex waveguide screwdriver, and one calibration data USB drive. The calibration kit is collected in a ruggedized box
WR-06 calibration kitWaveguide calibration kit, 110...170 GHz, impedance 50 Ω, consists of one fixed short, one fixed matching load, waveguide shims, two waveguide quick connects, ten 3/32 hex head waveguide screws, six 3/32 hex head extended waveguide screws, four alignment dowel pins, a 3/32” hex waveguide screwdriver, and one calibration data USB drive. The calibration kit is collected in a ruggedized box
WR-08 calibration kitWaveguide calibration kit, 90...160 GHz, impedance 50 Ω, consists of one fixed short, one fixed matching load, waveguide shims, two waveguide quick connects, ten 3/32 hex head waveguide screws, six 3/32 hex head extended waveguide screws, four alignment dowel pins, a 3/32” hex waveguide screw driver and one calibration data USB drive. The calibration kit is collected in a ruggedized box
WR-10 calibration kitPrecision calibration kit, contains a flush short, offset piece and broadband load which allows for a full 12-term port calibration. For use with with the CobaltFx FEV-10 frequency extension system , impedance 50 Ω
WR-12 calibration kitPrecision calibration kit contains a flush short, offset piece and broadband load which allows for a full 12-term port calibration. For use with with the CobaltFx FEV-12 frequency extension system , impedance 50 Ω
WR-15 calibration kitPrecision calibration kit contains a flush short, offset piece and broadband load which allows for a full 12-term port calibration. For use with with the CobaltFx FEV-15 frequency extension system , impedance 50 Ω
Other accessories
ModelDescription
CMTBTS65Bias T with very low insertion loss for entire bandwidth (<1 dB). Minimal return loss and VSWR characteristics across frequency range. Matched to 50 Ω and measured in a 50 Ω test set-up. Extremely flat gain response (no "suck-out") over frequency range. SMA female connectors, frequency range 10 MHz...6.5 GHz, impedance 50 Ω
CMTBTS20Bias T with very low insertion loss for entire bandwidth (≪1 dB). Minimal return loss and VSWR characteristics across frequency range. Matched to 50 Ω and measured in a 50 Ω test set-up. Extremely flat gain response (no "suck-out") over frequency range. SMA female connectors, frequency range 10 MHz...20 GHz, impedance 50 Ω
CMTBTS09Bias T with very low insertion loss for entire bandwidth (≪1 dB). Minimal return loss and VSWR characteristics across frequency range. Matched to 50 Ω and measured in a 50 Ω test set-up. Extremely flat gain response (no "suck-out") over frequency range. SMA female connectors, frequency range 10 MHz...9 GHz, impedance 50 Ω
CMTBTHC65Bias T with very low insertion loss for entire bandwidth (≪1 dB). Minimal return loss and VSWR characteristics across frequency range. Matched to 50 Ω and measured in a 50 Ω test set-up. Extremely flat gain response (no "suck-out") over frequency range. SMA female connectors, frequency range 10 MHz...6.5 GHz, high current, impedance 50 Ω
CMT TW-SSMA type torque wrench, for SMA 3.5 mm, 2.92 mm, 2.4 mm and 1.85 mm type connectors. 8.0 mm; 1.70 Nm
CMT TW-NN-type torque wrench, for a wide range of coaxial connectors. HEX size 20.0 mm; 1.60 Nm
C1209VNA rack mount kit for Cobalt C1209. Includes track slides and handles for the full size USB VNA
C1220VNA rack mount kit for Cobalt C1220. Includes track slides and handles for the full size USB VNA
Test cables
ModelDescription
FEVSet of 5 cables at a standard length of 1.2 m for one extender: 4 RF cables and 1 DC cable. Impedance 50 Ω
C50NMNM-xN male to N male; frequency of 18,000 MHz; length 0.6 m, 0.9 m, or 1.5 m; impedance 50 Ω
C50SMNM-xSMA male to N male; frequency of 18,000 MHz; length 0.6 m, 0.9 m, or 1.5 m; impedance 50 Ω
C5024NMDF24M-x2.4 NMD female to 2.4 mm male; frequency of 50 GHz; length 0.6 m, 0.9 m, or 1.5 m; impedance 50 Ω
C50292MM2.92 mm to 2.92 mm; frequency of 40,000 MHz; length 0.6 m; impedance 50 Ω