ACKSYS AirWave Ultra-Compact WiFi 6 Client/AP
Description
Files/Downloads
Benefits of the AirWave Client, Router, Access Point, and Mesh
- Compact WiFi 6 client, router, access point, and mesh.
- Fast roaming, designed for seamless connectivity in AGVs and industrial applications.
- 2 concurrent radios 2.4 GHz and 5 GHz.
ACKSYS AirWave Ultra-Compact WiFi 6 Client/AP
The ACKSYS AirWave is a compact all-in-one industrial WiFi 11ax router (client, access point, repeater, router, and optional advanced mesh). It has concurrent dual radios 2.4 GHz and 5 Ghz, one 2.5 GbE port and is delivered with antennas. Typical fields of applications are machine manufacturers, smart buildings, and industrial automation.
- Advanced WiFi 6 connectivity.
- Fast roaming for seamless mobility.
- Ultra-compact and industrial-grade design.
- All-in-one multifunction product: Client, routing functions, access point, MESH capabilities. Supports any type of Ethernet protocol such as Modbus/TCP, EtherNet/IP, Safe Ethernet, PROFINET etc.
- Enhanced security.
- Centralized administration.
- Micro-SD card slot for configuration and logs storage.
Model Overview
| Model | ACKSYS AirWave |
| Ethernet interface | 1-port 2.5 Gigabit Ethernet Base TX auto-sensing, auto MDI/MDIX cross-over (10/100/1000/2500), RJ45 Ethernet interface |
| Ethernet networking | IPv4/IPv6 compliance, frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server and client), DNS relay |
| Ethernet routing | Multicast (PIM), IP redundancy (VRRP), static routes, NAT 1:1, NAT router, router |
| Administration | http, https, MQTT, SNMP agent (V1, V2C, V3), CLI Micro-SD card: save/restore configuration and logs storage WaveManager On premise or Cloud administration tool |
| WiFi interface | 2 concurrent radios WiFi6 (IEEE 802.11 ax) 2.4 GHz and 5 GHz, MIMO 2T2R, ANI (Adaptive Noise Immunity); radio connectors: 2x RP-SMA |
| WiFi radio data rate | 1201 Mbps at 5 GHz, 573.5 Mbps at 2.4 GHz |
| Operating frequencies | ISM: 2.4...2.483 GHz (up to 14 channels) UNII: 5.15...5.25 GHz (up to 4 channels) UNII-2: 5.25...5.35 GHz (up to 4 channels) UNII-2 ext: 5.470...5.725 GHz (up to 11 channels) UNII-3: 5.725...5.825 GHz (up to 4 channels) Supports DFS and TPC |
| Output power | 2.4 GHz: up to 25 dBm (aggregate)/5 GHz: up to 23 dBm (aggregate) |
| Sensitivity max. | 2.4 GHz: -83 dBm/5 GHz: -91 dBm |
| Security | EN18031 with firewall, DoS, https, MAC filtering, WPA/WPA2/WPA3-Personal and Enterprise (IEEE 802.1X/RADIUS), tunnels L2 (GRE), VPN (OpenVPN, IPsec), SNMP V3, Rogue AP detector, Secure BOOT |
| WiFi modes | Access point, client, router, Rogue AP detector, advanced mesh (optional) |
| WiFi services | Fast roaming, hot Spot 2.0, Wireless Load Balancing (Load balancing, band steering, client roaming control), WMM QoS |
| LEDs signaling | Radio: status Ethernet: status – activity Power: on-off SD card status |
| Power supply | +7...+48 VDC, 3-pin Phoenix connector and PoE 802.3af |
| Dimensions (mm) | 103 x 87 x 21 (without rail DIN) |
Information on product safety:
Manufacturer:
ACKSYS Communications & Systems, ZA du Val Joyeux, 10 rue des Entrepreneurs, 78450 Villepreux/FRA
www.acksys.com
Last seen
