Digilent Analog Discovery Pro 2400 High-Speed, High-Bandwidth Mixed Signal Oscilloscopes
Benefits of the ADP2440 and ADP2450 USB 3.2 Oscilloscopes with Waveform Generator
- Choose from two models with high resolution (12 bit, 600 MS/s, 100 MHz) or higher bandwidth (8 bit, 1 GS/s, 200 MHz).
- Multifunctional: Voltmeter, data logger, spectrum analyzer, network analyzer, impedance analyzer, AWG, logic analyzer, and more.
- Powerful software support with WaveForms and WaveForms SDK.
Digilent Analog Discovery Pro 2400 High-Speed, High-Bandwidth Mixed Signal Oscilloscopes
The Digilent Analog Discovery Pro ADP2440 and Analog Discovery Pro ADP2450 are USB 3.2 based based multifunctional MSOs/mixed signal oscilloscopes. The have four analog channels with either 100 MHz bandwidth at 12-bit resolution (ADP2440) or 200 MHz bandwidth at 8-bit resolution (ADP2450). Both versions feature a 16 channel logic analyzer and pattern generator, an arbitrary waveform generator, and seamless integration with the WaveForms software.
- USB 3.2 based multifunctional MSOs (mixed signal oscilloscopes).
- Four analog inputs at either
- ADP2440: 12 bit, 600 MS/s, 100 MHz bandwidth.
- ADP2450: 8 bit, 1 GS/s, 200 MHz bandwidth.
- Dual Mode for seamless multi device integration.
- 14 bit ARB/arbitrary waveform generator with 15 MHz bandwidth.
- 512 MB of deep buffer memory for low latency repeated triggers to be freely allocated between analog and digital systems.
- 16 digital inputs/outputs for the logic analyzer, pattern generator, and protocol generator.
- Extensive and powerful software support with WaveForms and WaveForms SDK.
- Expansive analysis support including Bode plot, dedicated FFT, impedance analyzer, bus analyzer, data logger, and more.
Model Overview
| Model | Analog Discovery Pro ADP2440 | Analog Discovery Pro ADP2450 | |
| 410-436-1 | 410-436 | ||
| Analog input | Supported instruments | Oscilloscope, voltmeter, data logger, spectrum analyzer, network analyzer, impedance analyzer, curve tracer, and script editor instruments | |
| Number of channels | 4, single-ended, front-panel BNC, 1 MΩ/50 Ω selectable input impedance | ||
| Hardware input ranges | ±25 mV, ±50 mV, ±100 mV, ±250 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V2), ±25 V2) | ||
| Bandwidth (-3 dB)3) | 100+ MHz | 200+ MHz | |
| Resolution | 12 bit | 8 bit | |
| Aggregate sample rate | 600 MS/s | 1 GS/s | |
| Max. buffer size | Up to approx. 357.9 million samples | Up to approx. 536.8 million samples | |
| Digital-I/O | Supported instruments | Logic analyzer, pattern generator, static-I/O, protocol, and script editor instruments. These pins are the same ones used in the digital inputs of the MSO/mixed signal oscilloscope | |
| Number of channels | 16, individually programmable as digital inputs or outputs, 100 mil 2x10 MTE header | ||
| Voltage | Input 0...+3.3 V CMOS (5 V tolerant) output 3.3 V CMOS | ||
| Logic level | Input low voltage, VIL, min. 0 V, max. 0.8 V Input high voltage, VIH, min. 2.0 V, max. 5 V Output low voltage, VOL, min. 0 V, max. 0.5 V Output high voltage, VOH, min. 2.4 V, max. 3.3 V | ||
| Max. sampling rate | Input 1.2 GS/s, output 100 MS/s | ||
| Max. buffer size | Input up to approx. 268.4 million samples for all digital inputs, output 32768 samples | ||
| Analog output | Supported instruments | Waveform generator (AWG), network analyzer, impedance analyzer, tracer, and script editor instruments | |
| Number of channels | 1, single-ended, front-panel BNC | ||
| Waveform generator | Standard functions: Sine, square, triangle, sawtooth, ramp up, ramp down, DC voltage, noise, trapezium, others; advanced waveforms: Sweep, modulation and summing (phase, AM, FM), math, play mode, custom | ||
| Output voltage range | ±5 V open-circuit or at high impedance load | ||
| Bandwidth | >15 MHz | ||
| Resolution | 14 bit | ||
| Max. sample rate | 125 MS/s | ||
| Max. play buffer size | 250 million samples | ||
| Trigger system | Sources | Input and output trigger: Analog channels, digital channels, AWG start, pattern generator start, external trigger (TRIG1 or TRIG2), manual | |
| Modes | None, auto, normal, manual (forced trigger), single | ||
| Analog trigger | Edge, pulse, timeout, transition, hysteresis | ||
| Digital trigger | Edge, level, glitch, timeout, length, counter, value, protocol | ||
| External trigger | Number of channels | 2, digital, programmable as input or output, back-panel BNC | |
| Voltage | Input 0...+3.3 V CMOS (5 V tolerant), output 3.3 V CMOS | ||
| Logic level | Input low voltage, VIL, min. 0 V, max. 0.8 V Input high voltage, VIH, min. 2.0 V, max. 5 V Output low voltage, VOL, min. 0 V, max. 0.5 V Output high voltage, VOH, min. 2.4 V, max. 3.3 V | ||
| Interface | USB 3.2 (5 Gbps) Type-C | ||
| Power | External power supply, 4.5...5.5 V, 4 A recommended; barrel connector size (mm) 5.5 x 2.1 (positive inner pin) | ||
| Dimensions (WxDxH, mm) | 210 x 165 x 38, with connectors: 210 x 191 x 38; 993 g | ||
- Maximum supported cable length is 3 m.
- When using the 50-Ω input impedance option on the analog input channels the maximum voltage input is ±5 V.
- When using a cable with the appropriate frequency response.
Included: USB MSO ADP 2440 or 2450, 4x T2200 200 MHz x1/x10 oscilloscope probes, 1x keyed flywire MTE Cable (2x10), 20x minigrabbers with leads, 1x USB 3.2 Type-C-to-C cable (2 m), 1x power supply adaptor, 1x quick start guide, 1x safety, environment, and regulatory information document.
Information on product safety:
Manufacturer:
Digilent (now a part of Emerson), 1300 NE Henley Ct. Suite 3, Pullman, WA 99163/USA
www.digilent.com
Responsible person:
Meilhaus Electronic GmbH, Am Sonnenlicht 2, 82239 Alling/DEU
info@meilhaus.com
Related Products
