Digilent Artix-7 Series FPGA Development and Trainer Board
Digilent USB104 A7
The Digilent USB104 A7 FPGA board works with the Xilinx Artix-7 XC7A100T and is designed for use in the industrial temperature range of -40...+100°C. The board also has a SYZYGY port for high-speed data acquisition with Zmod expansion modules. This allows users to quickly develop and run customized FPGA-based data acquisition and signal processing applications on embedded systems. Ideal application areas include industrial automation, embedded OEM, telecommunications and mil-aero.
The Digilent USB104 A7 has the same mounting dimensions as the PC/104 form factor. The inputs and outputs are equipped with on-board LEDs and push-buttons. The SYZYGY-compatible Zmod extension is supplemented by three 12-pin Pmod ports. An integrated USB hub and controller connects the USB104 A7 to JTAG, UART and a parallel data port (DPTI) via a single connection. The DPTI data transfer interface enables host-to-FPGA data transfer and is easily managed with Digilent's Adept 2 application.
Extensions
- Pmod Expansion: Pmod devices are small I/O interface boards that provide an ideal way to expand the capabilities of programmable logic and embedded control boards. Developed by Digilent and used throughout the industry, the Pmod standard has become one of the most widely used expansion standards for rapid prototyping with FPGA development boards.
- Zmod Extension: Zmod is an additional extension solution from Digilent that utilizes the open source SYZYGY standard from Opal Kelly. Faster than the Pmod standard and more compact and cost-effective than FMC, Zmods improve customization options for high-speed measurement and I/O.
Digilent Basys 3
The FPGA trainer board Basys 3 is ideal for getting started with FPGA technology. It is an entry-level development board based on an AMD Artix 7 FPGA. As a complete and ready-to-use development platform for digital circuits, it contains enough switches, LEDs and other I/O devices to enable a large number of designs without additional hardware. There are also enough free FPGA I/O pins to extend designs with Digilent Pmods or other customized boards and circuits. The Basys 3 was developed exclusively for the AMD Vivado Vivado Design Suite, and the Standard Edition is available as a free download from AMD.
Model Overview
| Model | USB104 A7 | Basys 3 |
| 410-398 | 410-183 | |
| Description | AMD Artix-7 FPGA development board with SYZYGY-compatible expansion | AMD Artix 7 FPGA trainer board, recommended for introductory users |
| FPGA, system | Logic cells 101,440. DSP slices 240. Memory 4,860 kbits. Power: | AMD Artix 7 FPGA XC7A35T-1CPG236C. 33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops). 1,800 kbits of fast block RAM. 5 clock management tiles, each with a phase-locked loop (PLL). 90 DSP slices. Internal clock speeds exceeding 450 MHz. On-chip analog-to-digital converter (XADC). Digilent USB-JTAG port for FPGA programming and communication. 12-bit VGA output. |
| Memory | 512 MB DDR3/DDR3L with 16-bit bus at 800 MT/s (1.5 V) or 667 MT/s (1.35 V). 16 MB Quad-SPI Flash for storing FPGA configuration. | Serial Flash. |
| USB | USB-JTAG programming circuitry. USB-UART bridge. Adept DPTI/DSPI data transfer interface for high speed host to FPGA data transfer. On-board USB hub eliminates the need for multiple USB cable connections. | USB-UART bridge. USB HID host for mice, keyboards and memory sticks. |
| Push-buttons, LEDs, etc. | 2 push-buttons. 4 LEDs. | 16 user switches. 16 user LEDs. 5 user push-buttons. 4-digit 7-segment display. |
| Expansion connectors | One standard SYZYGY port (Zmod). Three standard Pmod ports. | 4 Pmod ports: 3 Standard 12-pin Pmod ports, 1 dual purpose XADC signal/standard Pmod port. |
| Product compliance | HTC: 8471809000. ECCN: EAR99. | n. s. |
| Lieferumfang | USB104 A7-100T, 1.5 m USB 2.0 A to B shielded cable, four 5 mm standoffs, 30 W/5 V/6 A power supply with US and EU adaptors | Basys 3 FPGA development board, custom Digilent cardboard box with protective foam |
Information on product safety:
Manufacturer:
Digilent (now a part of Emerson), 1300 NE Henley Ct. Suite 3, Pullman, WA 99163/USA
www.digilent.com
Responsible person:
Meilhaus Electronic GmbH, Am Sonnenlicht 2, 82239 Alling/DEU
info@meilhaus.com
Last seen
