ITECH IT8400 High Performance DC Electronic Load up to 600kW

Benefits of the IT8400 DC Electronic Load up to 1200 V

• DC load with power up to 600 kW through master-slave connection in parallel.
• Suitable for automotive electronics, battery discharge function, solar PV applications, etc.
• High-precision three current measurement ranges with resolution up to 40 µA.

ITECH IT8400 High Performance DC Electronic Load up to 600 kW

The ITECH IT8400 are high-performance DC electronic loads. They have two voltage levels, 600 V and 1200 V. The devices support master-slave connection in parallel with power from 6 kW to 600 kW, and is capable of fast double power loading. The IT8400 have built-in CAN, LAN/Ethernet, USB, RS232, and analog interfaces, optional GPIB, suitable for remote control and system building. The full protection functions make them an ideal solution for the test of fuel celsl, power battery discharge, DC charging pile, BOC, power electronics, solar, automotive high-voltage components, DC-DC, motor etc.

• Max. voltage 1200 V.
• Current range 1.5...15,000 A.
• Power extended to 600 kW through master-slave connection in parallel.
• High-precision three current measurement ranges with resolution up to 40 µA.
• Fast double power loading capability (<3 s).
• 25 kHz fast dynamic mode, current rising and falling time is adjustable.
• Provide 8 working modes: CC, CV, CR, CP, CC+CV, CV+CR,CR+CC, CP+CC.
• 1 kHz continuous sampling rate.
• List programming.
• Battery discharge function used to test energy storage devices such as batteries and super capacitors.
• CV loop speed is adjustable to match different power supplies.
• 500 kHz voltage and current sampling rate.
• Time measurement, OCP/OPP test short circuit simulation, automatic test.
• Soft start and soft shutdown to prevent voltage fluctuations during on/off.
• I-monitor function.
• Full protection: OVP, UVP, OCP, OPP, OTP, current oscillation protection, current limit, power limit, reverse alarm, etc.
• Power-off retention memory function, recording up to 100 groups data.
• Independent control, easy to maintain and install.
• Built-in standard LAN/Ethernet, USB, RS232, CAN and analog-I/O interface, optional GPIB.
• LabVIEW driver and SCPI protocol.

Model Overview