TekBox TBL0225-2 2UH Line Impedance Stabilisation Network/LISN

TekBox TBL0225-2 2UH Line Impedance Stabilisation Network

TekBox LISN According to ECSS-E-ST-20-07C

The TekBox TBL0225-2 is a two-path 50 Ω||2 µH LISN characterized from 10 Hz to 200 MHz. The LISN is based on the standard ECSS-E-ST-20-07C Rev 1. This standard provides the general schematic of the LISN and allows for some flexibility in component values. The TBL0225-2 implementation aims for use in EMC measurements of satellites and spacecraft. The TBL0225-2 LISN does not have an output for conducted emission measurements; instead, it merely functions as a network for line impedance stabilisation. An RF current monitoring probe is used to measure conducted emissions, according to the standard.
The 2 µH inductor mimics the typical inductance of the supply wire harness in spacecraft or satellites. The LISN is inserted into the power line and power return line of the EUT (equipment under test).

• LISN type: V-AMN, 50 Ω||2 µH.
• Characterized frequency range 10 Hz to 200 MHz.
• DC resistance 100 mΩ per path.
• Maximum current 25 A continuous.
• Operating voltage range 0...60 VDC.
• EUT/SOURCE terminals: 4 mm banana sockets.
• Dimensions (mm) 260 x 140 x 150; 4.1 kg.