Tekbox TBLNA Amplifier Series

New
Scaled Prices
starting 821,10
including VAT free shipping (Germany)
min Quantity
1 piece
Unit price
base price
Variants
technical Question?
recommend by email
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Files/Downloads

Tekbox TBLNA Amplifier Series

Tekbox TBLNA-110M-50 DC-coupled Low Noise Amplifier

The Tekbox TBLNA-110M-50 is a DC-coupled amplifier with a gain of 40 dB in the frequency range DC to 110 MHz. Application: External pre-amplifier for measurement receiver TBMR-110M. Pre-amplifier for amplifying low level input signals to spectrum analyzers. General-purpose LNA for low and very low frequency applications, where conventional LNAs sometimes suffer from an increase in noise figure.

The version Tekbox TBLNA-110M-HZ is a DC-coupled impedance converter from 1 MΩ to 50 Ω with a flat response in the frequency range from DC to 110 MHz and a 3 dB bandwidth from DC to 500 MHz. One of the impedance converter’s two separate outputs has a gain of 0 dB, while the other has a gain of 20 dB. When the TBLNA110M-HZ is used with a 1:10 oscilloscope probe, this corresponds to a gain of -20 dB or 0 dB.
Typical application are: In-circuit measurements in 50 Ω systems, using standard oscilloscope probes. High impedance frontend for spectrum analyzers and other RF-equipment with 50 Ω inputs.

Tekbox TBLNA-9K30 Loop Antenna Pre-Amplifier

The Tekbox TBLNA-9K30 is a pre-amplifier for the TBMA6-P, expanding the dynamic range of the passive loop antenna. The pre-amplifier is designed for the TBMA6-P, but it can be used together with any passive loop antenna for the frequency range 9 kHz to 30 MHz. The pre-amplifier is equipped with a charger for 12 pieces standard AA NiMh batteries. A ¼" thread at the bottom of the TBLAA1 permits connectivity to standard tripods.

Model Overview

ModelTBLNA-110M-50TBLNA-110M-HZTBLNA-9K30
Frequency rangeDC...110 MHzFlat: DC...110 MHz, typ.;
3 dB: DC...500 MHz, typ.;
usable: DC...1 GHz
9 kHz...30 MHz
Gain40 dB, typ. (≙ linear voltage gain 100)0 dB, 20 dB43 dB, typ.
RF-connectorsBNC-femaleBNC-femaleN-female
Input specificationImpedance 50 Ω;
return loss >16 dB, typ.;
noise voltage <1.5 nV/√Hz; 500 Hz...60 MHz: typ. 1 nV/√Hz;
max. level -25 dBm (≙0.036 VPP); for output saturation;
protection pin-diode limiter;
max. ratings +30 dBm in a 50-Ω system/±0.7 VDC max. input rating (±1.5 VDC, 1 s)
Impedance 1 MΩ||20 pF;
input noise voltage >2 MHz typ. <10 nV/√Hz;
max. input level for linear output 150 mVpp for output saturation at the 20 dB gain output, 1:1;
1.5 Vpp for output saturation at the 20 dB gain output, 1:10;
1.5 Vpp for output saturation at the 0 dB gain output, 1:1;
15 Vpp for output saturation at the 0 dB gain output, 1:10;
max. ratings 50 VppAC
Return loss <-15 dB at 9 kHz...30 MHz, typ.;
noise voltage 1 nV/√Hz, typ.
Output specificationImpedance 50 Ω;
return loss >30 dB, typ.;
P1dBout +15 dBm (≙3.5 VPP); output saturation;
IP3out +28 dBm;
DC offset <10 mV at output; input terminated with 50 Ω
Impedance 50 Ω
output return loss >25 dB;
P1dBout +8.6 dBm (1.7 Vpp), 20 dB gain output;
+8.6 dBm (≙1.7 Vpp ), 0 dB gain output;
IP3out +19 dBm, 20 dB gain output;
+19 dBm, 0 dB gain output;
DC offset <10 mV output offset
Return loss <-20 dB at 9 kHz...30 MHz, typ.;
P1dBout +15 dBm (indicated with yellow LED);
IP3out +28 dBm
Power supplyCoaxial power socket; 2 mm/5.5 mm; positive center conductor;
indicator LEDs for power ON, power good;
operating voltage 12 V; external power supply 100...240 V, 50/60 Hz;
current consumption 250 mA
Coaxial power socket; 2 mm/5.5 mm; positive center conductor;
indicator LEDs: power ON, power good;
operating voltage 12 V; external power supply 100...240 V, 50/60 Hz;
current consumption 275 mA
12 pieces standard AA NiMh cells (not supplied);
charger: Mascot Type 2116;
current consumption 120 mA;
operation time approx. 10 h, depending on NiMh battery model;
LED indicators for power ON, low battery, saturation
Dimensions (mm)(WxHxL) 135 x 40 x 110; 330 g(WxHxL) 135 x 40 x 110; 350 g⌀180, H 52; 1.7 kg; tripod mount ¼" thread


Information on product safety:

Manufacturer:
TekBox Digital Solutions Vietnam Co. Ltd., Saigon Hi-Tech Park, Factory 4, 4F, Lot I-3B-1, N6 Street, Thu Duc City, 700 000 Ho Chi Minh City/VNM
www.tekbox.com

Responsible person:
Meilhaus Electronic GmbH, Am Sonnenlicht 2, 82239 Alling/DEU
info@meilhaus.com

Last seen