B+K Precision Accessories for Power Supplies, Loads and LCR Meters
Description
Files/Downloads
Accessories for the B+K Precision instruments
Model Overview
| Model | Description | For use with model |
| For power supplies and loads | ||
| BK TL-5A | 5 A cable set red/black, 4 mm banana plug to alligator clip, lenght approx. 1 m | BK1550, BK1651A, BK1652, BK1670A, BK1671A, BK1672, BK1673, BK1685B, BK1687B, BK1688B, BK1900B, BK1901B, BK1902B, BK9110, BK9111 |
| BK TL-30 | 30 A test leads red/black with spade lug connector (for power supply with threaded binding post) and clips for bench power supply applications, e.g. battery charging. Lenght approx. 0.75 m | BK1550, BK1651A, BK1652, BK9110, BK9111 |
| BK TL-9110 | Do it yourself solderless unsleeved banana plug kit red/black/green | BK1672, BK1673 |
| BK TL-9120 | Set of 3 cables red/black/green, banana plugs to banana plugs (stackable), lenght 50 cm | BK1672, BK1673 |
| BK TL-9160 | Set of 3 cables red/black/green, banana plugs to banana plugs (stackable), lenght 150 cm | BK1550, BK1672, BK1673 |
| BK TL-KB1 | 4-wire kelvin clip test fixture (included with BA6010 and BA6011). Using these will minimizes the influence of the test lead resistance and improves measurement accuracy. | BA6010, BA6011 |
| BK TL-PS | Accessory kit for power supplies or loads, red/black: Test leads (120 cm, max. 25 A), spade lug adapters (6 and 4 mm, max. 36 A), standard alligator clips (max. 3 A), 4 mm banana plug adapters (max. 36 A), large insulated alligator clips (36 A), sense leads (10 cm, max. 3 A) | BK1550, BK1651A, BK1652, BK1670A, BK1671A, BK1685B, BK1687B, BK1688B, BK1900B, BK1901B, BK1902B, BK9110, BK9111, BK9115(-AT), BK9116, BK9117 |
| BK TL-PWR1 | High current, high quality premium test lead accessory red/black, externally braided wrap with large fork-type spade connectors for connecting to high current power supplies or DC loads, length 2 m, rated current 60 A, gauge 8 AWG, connector inner diameter approx. 8 mm/outter width approx. 15 mm | BK1685B, BK1687B, BK1688B, BK1900B, BK1901B, BK1902B, BK9115(-AT), BK9116, BK9117, BK8500, BK8502, BK8510, BK8512, BK8514, BK8518, BK8520, BK8522, BK8600, BK8601, BK8602, BK8610, BK8612, BK8614, BK8616, BK8620, BK8622, BK8624, BK8625 |
| For digital multimeters | ||
| TL-130B | General purpose red/black DMM kit. 1000 V, CAT III (600 V, CAT IV) probes, 300 V, CAT II 5 A alligator clips, UL listed test leads. Silicone lead wire length 1.5 m). Tri-fold velcro pouch | BK2831E, BK5491B, BK5492B, BK5492BGPIB |
| TL-37 | Red and black CAT III (IV) 1000 V (600 V) test leads. Right angled sheathed banana replacement 10 A test leads for digital multimeters. With tip cap on, they are rated to CAT III 1000 V, CAT IV 600 V, with tip cap off, they are CAT II 1000 V | BK2831E, BK5491B, BK5492B, BK5492BGPIB |
| TL-500B | High performance bench DMM accessory kit with 4x test lead 4 mm sheathed P-RaP silicon (2x black, 2x red), 2x spring tip mini-probe-4 mm jack (1x black, 1x red), insulated BNC male adapt-4 mm safety jacks, 2x adaptor 4 mm banana plug to jack (1x black, 1x red), 2x mini flex clip-4 mm jack-silicon 0.40, 10 cm (1x black, 1x red), 2x adaptor 6 mm spade 4 mm-jack (1x black, 1x red), 2x lead minipro-J-PVC 0.40, 10 cm (1x black, 1x red), 1x tweezer test lead set - 4 mm P, w/PVC pouch | BK2831E, BK5491B, BK5492B, BK5492BGPIB |
| TL-50B | Maxi-pro DMM kit, 1000 V, CAT III (600 V, CAT IV), UL listed test leads. Silicone lead wire length 1.5 m). Tri-fold velcro pouch | BK2831E, BK5491B, BK5492B, BK5492BGPIB |
| For LCR meters | ||
| BK TL-889A | Kelvin clip to four BNC lead | BK891, BK889B |
| BK TL-89F1 | Test fixture for convenient testing of axial and radial leaded type components, frequency DC...10 MHz, DC bias ±40 Vpeak max. (AC+DC), operating temperature 0...40°C | BK891, BK894, BK895, BK889B |
| BK TL-89F2 | Low profile test fixture for convenient testing of radial leaded type components, frequency DC...10 MHz, DC bias ±40 Vpeak max. (AC+DC), operating temperature 0...40°C | BK894, BK895 |
| BK TL-89K1 | BNC to Kelvin clip test ficture for testing of leaded components |
BK894, BK895 |
| BK TL-89S1 | Test fixture for measuring small surface-mount devices (SMD), frequency DC...10 MHz, DC bias ±40 Vpeak max. (AC+DC), operating temperature 0...40°C, terminal connection BNC/4 terminal-pair, dimensions (WxHxD, mm) approx. 130 x 60.3 x 84, approx. 0.305 kg | BK891, BK894, BK895, BK889B |
| BK TL-89T1 | Transformer test fixture, used to test the primary and secondary inductance, turn ratio, mutual inductance, and primary and secondary direct-current resistance of a transformer directly | BK894, BK895 |
| BK TL-BSB | Brass shorting bar used for short correction |
BK894, BK895 |
| BK TL-LCR | Test leads for handheld LCR meters, red/black, sheathed banana to alligator clip; short length allows for accurate component measurements | BK878B, BK879B, BK880 |
| BK TL-8KC1 | Kelvin test lead that is useful when measuring leaded capacitors, inductors, and resistors; length approx. 40.64 cm. The TL8KC1 is an included accessory with the model BK880 | BK878B, BK879B, BK880 |
| BK TL-8SM | SMD tweezer probe that is useful when measuring surface mount capacitors, inductors, and resistors; length approx. 40.64 cm. The TL8SM is an included accessory with the model BK880 | BK878B, BK879B, BK880 |
Customers also bought
