B+K Precision BK980x Series AC Power Supplies up to 300V/12A, 1500VA
Benefits of the BK9801, BK9803, BK9805 Power Suplies and Analyzers
- Output frequency adjustable 45...500 Hz.
- Displays VRMS, IRMS, IPeak, frequency, power factor, apparent power, true power, and elapsed output time.
- Adjustable phase angle control.
B+K Precision BK980x Series AC Power Supplies up to 300 V/12 A, 1500 VA
The devices of the B+K Precision BK980x series (BK9801, BK9803, BK9805) are both fully programmable AC sources and measurement tools. These linear AC sources deliver a maximum of 1500 VA through the universal line output terminals on the front and the output connector on the rear. The output can be varied from 0 to 300 V with 0.1 V programming resolution. The output frequency can also be adjusted from 45 to 500 Hz with start and stop phase angle from 0 to 360 degrees. The bright VFD display shows VRMS, IRMS, IPeak, frequency, power factor (PF), apparent power, true power, and elapsed output time. The AC source provides a power line disturbance (PLD) simulator, list mode, and sweep mode for simulation of common power grid faults and disturbances. A built-in dimmer function is also available for testing motors and LEDs.
- 0...300 V low distortion AC power sources.
- Models delivering a maximum of 1500 VA, 12 ARMS/48 APeak.
- Output frequency adjustable 45...500 Hz.
- Select 150 V/300 V autoranging or 300 V range operation for continuous sweep 0...300 V.
- Displays VRMS, IRMS, IPeak, frequency, PF (power factor), apparent power, true power, and elapsed output time.
- Adjustable phase angle control.
- Programmable voltage and frequency limit settings.
- Built-in PLD and dimmer simulation.
- Voltage and frequency sweep mode.
- List mode: 10 user-defined programs with up to 100 programmable steps each.
- BNC I/O for external triggering, output status indication/control, and synchronization.
- Save and recall up to 100 instrument settings.
- Standard USB (USBTMC-compliant), RS232, LAN interfaces, versions with GPIB (models B without GPIB).
- OVP/OCP/OPP/OTP protection modes and key lock function.
- Pre-compliance testing for voltage dips and frequency simulations according to IEC61000-4-11/4-14/4-28.
- LabVIEW driver and softpanel for remote control available.
Model Overview
| Model | Max. voltage | Max. current | Max. power | Interface |
| BK9801 | 0...300 V | 0...3 A | 300 VA | LAN, USB, RS232 |
| BK9803 | 0...300 V | 0...6 A | 750 VA | LAN, USB, RS232, GPIB (models B without GPIB) |
| BK9805 | 0...300 V | 0...12 A | 1500 VA | LAN, USB, RS232, GPIB (models B without GPIB) |
Included: AC power supply BK 9801, 9803 or 9805, AC power cord (BK9801 only), unterminated power cord with input connector (BK9803 and BK9805 only), rackmount ears and handles (BK9803 and BK9805 only), instruction manual, test report and certificate of calibration.
