Digilent Genesys 2 AMD Kintex 7 FPGA Development Board
Digilent Genesys 2 AMD Kintex 7 FPGA Development Board
The Digilent Genesys 2 is a high-performance, ready-to-use FPGA development board built around the AMD Kintex 7 FPGA. Everything needed for robust multimedia applications is already available on the board: DisplayPort connectors, HDMI sink and source, 16-bit VGA, 128x32 pixel OLED screen, and an audio codec with four 3.5 mm jacks. The Genesys 2 also offers five Pmod ports and a fully populated FMC HPC connector, which provide limitless expansion options. Additionally, the 10/100/1000 Ethernet, USB 2.0, and a USB HID host for mice and keyboards make the Genesys 2 easily integrated with other systems.
The free Standard Edition of the AMD Vivado Design Suite does not support the Kintex-7 325T, but a voucher is provided for Vivado Enterprise Edition at no extra cost. Guides and demos are available to help users get started quickly with the Genesys 2.
The Genesys 2 offers a robust collection of ports and peripherals, including:
- Fully-populated 400-pin FMC HPC connector with ten GTX lanes.
- USB-UART Bridge.
- 128x32 pixel OLED.
- 16-bit VGA connector.
- Pmod connector for XADC signals.
- Two four-lane DisplayPort connectors.
- HDMI Sink and HDMI Source.
- 10/100/1000 Ethernet PHY.
- 1 GB 1800 MT/s on-board DDR3.
- USB 2.0 Host/Device/OTG PHY
- Dedicated USB port for JTAG programming and data transfers.
- Micro SD card connector.
- Audio codec with four 3.5-mm jacks.
- Serial Flash.
- Five Pmod ports.
- USB HID Host for mice, keyboards and USB MSD Host for storage.
On-board FPGA: AMD Kintex 7 FPGA (XC7K325T-2FFG900C):
- 50,950 logic slices, each with four 6-input LUTs and 8 flip-flops.
- 16 Mbits of fast block RAM.
- Ten clock management tiles, each with a phase-locked loop (PLL).
- 840 DSP slices.
- Internal clock speeds exceeding 450 MHz.
- On-chip analog-to-digital converter (XADC).
- Up to 10.3125 Gbps gigabit transceivers.
- 1800 Mbps DDR3 data rate with 32-bit data width.
- Commercial -2 speed grade.
Product compliance:
HTC: 8471500150.
ECCN: 5A992.c.
Included: Genesys 2 AMD Kintex 7 development board, Digilent custom cardboard box with protective foam, USB A to Micro-B programming cable and one 12 V/3 A wall power supply with US and EU adaptors (UK plug adaptor not included), Vivado Design Suite voucher.
Information on product safety:
Manufacturer:
Digilent (now a part of Emerson), 1300 NE Henley Ct. Suite 3, Pullman, WA 99163/USA
www.digilent.com
Responsible person:
Meilhaus Electronic GmbH, Am Sonnenlicht 2, 82239 Alling/DEU
info@meilhaus.com
Last seen