Dx000PWRBKeysight InfiniiVision Power Applications Software Package

Special Price
Dx000PWRB Keysight InfiniiVision software bundle for power
min Quantity
1 piece
Unit price
base price
technical Question?
recommend by email
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.

Dx000PWRB Keysight InfiniiVision Power Applications Software Package

The Keysight InfiniiVision series oscilloscope/MSO software-oriented options are available via online licensing. These software-oriented options (such as serial decoding of different buses, mask limit test, power analysis, FRA/Bode) have been bundled into application-specific packages. The packages can be registered and used according to a perpetual license. Other hardware-oriented upgrades such as signal generator, memory, bandwidths and mixed signal upgrades are available as before. The InfiniiVision 1000X series is excluded from this licencing system. The bundles PWRB replace the former bundles PWRA.

The power applications bundle includes (depending on scope model):

  • Input AC power quality.
  • Current harmonics analysis.
  • Switching device analysis.
  • RDS(ON) and VCE(SAT) analysis.
  • Modulation analysis.
  • Output ripple analysis.
  • Turn on/off time analysis.
  • Transient response analysis.
  • PSRR (power supply rejection ratio).
  • Control loop response analysis.

Model Overview Dx000PWRB

Scope modelInfiniiVision 3000A seriesInfiniiVision 3000T seriesInfiniiVision 4000A seriesInfiniiVision 6000A series
Bundle versionD3000PWRBD3000PWRBD4000PWRBD6000PWRB
Power supply characterization measurements Input analysisReal power
Apparent power
Reactive power
Power factor
Crest factor (voltage and current)
Phase angle
Current harmonics
Inrush current
Switching device analysisSwitching loss
Slew rate (voltage and current)
Modulation analysis
Auto probe deskew
Output analysisOutput ripple
Turn on/off time
Transient response
Frequency response analysisPSRR-
Control loop response-
Other advanced analysis capabilitiesFrequency response analysis (Bode plots)-
USB-PD (power delivery) trigger and decode-
Mask test
Advanced mathstandardstandardstandard

Pick the Right Probe for Your Keysight Oscilloscope

ApplicationsSpeed and signal typesRecommended probeRequired probe bandwidth
LIN625 kbps, single-endedPassive probes (1 MΩ, single-ended)>50 MHz
ARINC 425100 kbps, differential▸N2791A/▸N2818A200 MHz
CAN 2.05 Mbps, differential▸N2791A/▸N2818A200 MHz
CAN FD10 Mbps, differential▸N2791A/▸N2818A200 MHz
MIL Std 15531 Mbps, differential, ±25 VPP▸N2791A/▸N2818A200 MHz
I²S (audio)approx. 2.8 MHz, single-endedPassive probes (1 MΩ, single-ended)>100 MHz
I²C/SMbux<4 MHz, single-endedPassive probes (1 MΩ, single-ended)>100 MHz
RS232/UART<10 Mbps, single-endedPassive probes (1 MΩ, single-ended)>100 MHz
RS422/48510 Mbps, differential▸N2791A/▸N2818A200 MHz
FlexRay10 Mbps, differential▸N2791A/▸N2818A200 MHz
SPI1...100 MHz, single-endedPassive probes (1 MΩ, single-ended) or ▸N2795A>100 MHz passive or 1 GHz active
MOST150 Mbps, differentialN2750A1.5 GHz
USB 2.0480 Mbps, differentialN2750A1.5 GHz
USB power delivery300 kbps, single-endedPassive probes (1 MΩ, single-ended)>50 MHz