Gossen Metrawatt METRAHIT ISO TRMS Multimeter with Insulation Measurement

Obsolete - not available
METRAHIT ISO
This Article is currently not on stock. Please enter your mail and we will notify you when the product is back on stock.
Your request has been accepted
Your mail is incorrect!
The requested article couldnt be found!
An error occured!
Please accept the Privacy Policy
recommend by email
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Accessories
Files/Downloads

No longer in the product range

Benefits of the METRAHIT ISO (M246B) True RMS Multimeter and Insulation Meter

  • Multimeter and insulation tester for general applications.
  • Internal, mains-independent power supply.
  • 4¾ place, ±30,000 digits.

Gossen Metrawatt METRAHIT ISO TRMS Multimeter with Insulation Measurement

The METRAHIT ISO is a rugged portablet multimeter and insulation measurement device/insulation tester for use in the field, suitable for servicing household appliance, machines (e.g. forklifts) and systems (e.g. photovoltaic. The instrument is equipped with an internal, mains-independent power supply.

  • Insulation resistance measurement up to 3.1 GΩ with interference voltage detection. Test voltages: 50, 100, 250, 500, 1000 V.
  • Multimeter with diverse functions (V, O, F, Hz).
  • TRMS measurements: TRMS AC/AC+DC for current/voltage up to 10 kHz.
  • Activatable low-pass filter, 1 kHz/-3 dB in the VAC range.
  • Direct current measurement, 100 nA to 10 A.
  • Current measurement with current sensor clamps - clip.
  • A transformation ratio of 1 mV:1 mA to 1 mV:1 A can be selected and is taken into consideration at the display.
  • Precision temperature indicator, °C or °F, for Pt100/Pt1000 sensors and type K thermocouples.
  • Diode measurement (IK = 1 mA, Uflow to 5.1 V) and continuity testing.
  • Display: 4¾ place, ±30,000 digits, illumination can be activated.
  • Acoustic signals for: continuity testing, dangerous contact voltages, exceeded overload limits.
  • Min-Max value storage.
  • Data memory and internal clock, power pack adapter socket.
  • IP 54 Housing protection, dust and splash protected, protective cover.
  • Bidirectional infrared interface for exchanging data with a PC.
  • Windows software available as accessory for processing and graphic display of measured values via RS 232 interface.

Model Overview

Model METRAHIT ISO
Article no. M246B
Resolution 4¾-place, ±30,000 digit
Protection 1000 V CAT II, 600 V CAT III, IP54
Isolation measurement Up to 3.1 GΩ with interference voltage detection. Test voltages: 50, 100, 250, 500, 1000 V
Multimeter functions Voltage, current, resistance, capacity, frequency. TRMS AC/AC+DC for current/voltage up to 10 kHz
Current measurement Direct 100 nA...10 A; with current sensor clamps/clip (ratio of 1 mV:1 mA to 1 mV:1 A selectable)
Temperature °C, °F for Pt100/Pt1000 sensors and thermocouples type K
Diode and continuity yes
Included 1x insulation multimeter METRAHIT ISO, 1x protective rubber cover, 1 pair of safety measurement cables with 4 mm test probes, 1000 V CAT II, 600 V CAT III (KS17-2), 1x condensed operating instructions, English/German, 1x operating instructions in English and German (CD ROM), 1x DAkkS calibration certificate, 2x Batteries, 1.5 V, type AA, installed

Information on product safety:

Manufacturer:
Gossen Metrawatt GmbH GMC-Instruments Group, Südwestpark 15, 90449 Nürnberg/DEU
www.gossenmetrawatt.com

Datasheet_GMC-I_Metrahit-ISO_en.pdf