Keysight PS00xxA Optically Isolated Differential Probes

New
starting 58,08
including VAT plus shipping
min Quantity
1 piece
Unit price
base price
Variants
technical Question?
recommend by email
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Files/Downloads

Keysight PS00xxA Optically Isolated Differential Probes

Galvanically isolated voltage probes separate the device under test (DUT) from the oscilloscope and earth ground, enabling safer and more accurate measurements. This isolation effectively rejects common-mode signals, minimizes noise interference, and eliminates ground loops in high-voltage environments. A high common-mode rejection ratio (CMRR) is essential for capturing small signals accurately, even in the presence of large common-mode voltages at floating nodes

Model Overview

ModelDescription
Probes
PS0004AOptically isolated differential probe, 350 MHz, 2 mAutoProbe 1 interface; cable type: Optical fiber bundle; overvoltage and measurement category per IEC -61010-0312: Non-CAT (mains isolated); safety certification: UL-certified; output drive: 50 Ω
PS0006AOptically isolated differential probe, 700 MHz, 2 m
PS0008AOptically isolated differential probe, 1 GHz, 2 m
Probe tips
PS0017AProbe tip, ±10 V, MMCX
PS0018AProbe tip, ±30 V, MMCX
PS0019AProbe tip, ±250 V, MMCX
PS0022AProbe tip, ±10 V, 100 mil pitch, 0.025" square pin socket
PS0023AProbe tip, ±100 V, 100 mil pitch, 0.025" square pin socket
PS0025AProbe tip, ±500 V, 100 mil pitch, 0.025" square pin socket
PS0027AProbe tip, ±1000 V, 200 mil pitch, 0.025" square pin socket
PS0028AProbe tip, ±2500 V, 200 mil pitch, 0.025" square pin socket
Accessories
PS0013-64701Bipod (included with each probe)
8710-2466SMA wrench (included with each probe)
PS0010ABasic connectivity kitincludes the following accessories:
  • DP0021-60002 solder-in Y-lead tip (1x)
  • DP0021-60001 socketed Y-lead tip (1x)
  • PP0013-60001 MMCX to square pin adapter (1x)
  • 1400-3652 micro SMD clip (2x)
  • Microcircuit hook test clips (2x>
  • Channel identification rings (12x)
PS0014AIsolated probe adaptor for 3D probe positioner (N2787A)
PS0015AProbe deskew and performance verification kit with MMCX

Agilent’s Electronic Measurement Group is now Keysight Technologies.


Information on product safety:

Manufacturer:
Keysight, 1400 Fountaingrove Parkway, Santa Rosa, CA/USA
www.keysight.com
(Keysight Technologies Deutschland GmbH)