Rigol DL3021(A), DL3031(A) Electronic DC Loads 200W/350W

Special Price
Scaled Prices
starting 522,41
including VAT free shipping (Germany)
min Quantity
1 piece
Unit price
base price
Variants
technical Question?
recommend by email
close
Please fill in all fields.
Question Type
Your E-mail Adress
My Question:
Please validate that you are not a robot.
Description
Accessories
Files/Downloads

Promotion until 2024-3-31: Reduced price (compared to the list price) for DL3031! (Valid while stocks last)

Benefits of the Rigol DL3000(A) Series Programmable DC Electronic Loads

  • Userfriendly interface with large color graphic display.
  • Superb performance specifications, power up to 200 or 350 W.
  • USB Host & Device standard. LAN on models "A" or optional.

Rigol DL3021(A), DL3031(A) Electronic DC Loads 200W/350W

DL3000 is a cost-effective programmable DC electronic load with high performance. With a user-friendly interface and superb performance specifications, DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. It can be widely used in various industries, such as automotive electronics, aerospace, and fuel cells.

  • DL3021/DL3021A: Single output, 150 V/40 A, total power up to 200 W.
    DL3031/DL3031A: Single output, 150 V/60 A, total power up to 350 W.
  • Dynamic mode: Up to 30 kHz.
  • Adjustable current rising speed: 0.001 A/µs to 5 A/µs.
  • Min. readback resolution: 0.1 mV, 0.1 mA.
  • 4.3 inch (10.9 cm) TFT LCD, capable of displaying multiple parameters and states simultaneously.
  • Overvoltage/overcurrent/overpower/overtemperature/reverse voltage protection.
  • 4 static modes: CC (constant current), CV (constant voltage), CR (constant resistor), CP (constant power).
  • 3 dynamic modes: Continuous, pulsed, toggled.
  • List function supports editing as many as 512 steps.
  • Battery test function, OCP test, OPP test, factory test function, etc.
  • Short-circuit test function.
  • Power-off memory function.
  • Built-in RS232, USB, LAN (LAN on versions "A" or optional) communication interface.
  • USB-to-GPIB converter module (optional).

Typical Applications of the Rigol DL3000(A) Series Loads

  • General-purpose testing in the R&D lab.
  • DC power supply industry, such as regulated power supply, constant current power supply, switching mode power supply (SMPS), module power supply, power adapter, etc.
  • Battery industry, such as various batteries and cell batteries.
  • Charger industry, such as battery charger and cell phone charger.
  • Power electronic device industry, such as MOSFET, IGBT, capacitor, and ballast resistor.
  • Teaching experiment.

Model Overview

Model Description U/I Power LAN Digital-I/O Frequency-Range CC Continuous Mode CC Slew-Rate Current Readback
DL3021 Programmable DC electronic load, single channel 150 V/40 A 200 W - - 0.001 Hz...15 kHz 0.001 A/µs...0.25 A/µs (low range), 0.001 A/µs...2.5 A/µs (>5 V, high range) 1 mA
DL3021A Programmable DC electronic load, single channel 150 V/40 A 200 W yes yes 0.001 Hz...30 kHz 0.001 A/µs...0.3 A/µs (low range)
0.001 A/µs...3 A/µs (>5 V, high range)
0.1 mA
DL3031 Programmable DC electronic load, single channel 150 V/60 A 350 W - - 0.001 Hz...15 kHz 0.001 A/µs...0.25 A/µs (low range), 0.001 A/µs...2.5 A/µs (>5 V, high range) 1 mA
DL3031A Programmable DC electronic load, single channel 150 V/60 A 350 W yes yes 0.001 Hz...30 kHz 0.001 A/µs...0.3 A/µs (low range)
0.001 A/µs...3 A/µs (>5 V, high range)
0.1 mA
Options (Functions of "A" Versions)
LAN-DL3 LAN interface
DIGITALIO-DL3 Digital-I/O option
HIRES-DL3 Readback resolution
FREQU-DL3 High frequency option
SLEWRATE-DL3 High slew rate option
Optional Accessories
CB-RS232-A 9-pin RS232 cable (female-to-female, cross-over)
DL-02 Terminal shield
USB-GPIB USB-GPIB module
CB-SENSE Sense cable
CB-20A-780MM 20 A red and black test lead
CB-40A-780MM 40 A red and black test lead
CB-60A-780MM 60 A red and black test lead
RM-1-DP800 DL3000 series rack mount kit for a single instrument
RM-2-DP800 DL3000 series rack mount kit for two instruments

Included: DL3000 device, power cord, either one of the following fuses:
Fuse 50T-0200H 250 V 0.20 A (AC selector: 230 VAC).
Fuse 50T-0315H 250 V 0.315 A (AC selector: 115 VAC).
Quick guide (hard copy).

Customers also bought