CobaltFx Series Millimeter Wave Frequency Extension System up to 330GHz

CobaltFx series millimeter wave frequency extension system up to 110/330GHz

min Quantity

1 piece

Unit price

base price

Variants

technical Question?

Please fill in all fields.

Question Type

Your E-mail Adress

My Question:

Please validate that you are not a robot.

I accept the Privacy Policy

Description

Accessories

Files/Downloads

Benefits of the CobaltFx FET Series up to 110 or 330 GHz for 2/4 Port VNA Series Cobalt

For 5G testing solutions.
Applications in material characterization, wafer S parameter measurements, automotive radar and sensor testing.
Test automation programming in LabVIEW, Python, MATLAB, .NET, etc.

CobaltFx FET Series Millimeter Wave Frequency Extension System up to 330 GHz

Models Copper Mountain FET1854, FET-WR15-HP, FET-WR12-HP, FET-WR10-HP and others

The Copper Mountain CobaltFx millimeter wave frequency extension system allows you to build a scalable and affordable 5G testing solution. The system comes with all necessary standard length cables. Total cost of the system depends on selected VNA. The extenders are packaged in small and versatile enclosures that allow for flexible port arrangements. The system can be anchored by your choice of the vector network analyzers as listed in the table below.

Applications

The system can be used for a variety of applications including antenna range measurements, material characterization, wafer s-parameter measurements, automotive radar & sensor testing, etc.

Model Overview

Model	FET1854	FET-WR15(-HP)	FET-WR12-(HP)	FET-WR10(-HP	WR8*	WR6.5*	WR5.1*	WR4.3*	WR3.4*
Frequency range	18...54 GHz	50...75 GHz	60...90 GHz	75...110 GHz	90...140 GHz	110...170 GHz	140...220 GHz	170...260 GHz	220...330 GHz
Test ports	1	1	1	1	1	1	1	1	1
Measured parameters	S₁₁, S₂₁, S₁₂, S₂₂				S₁₁, S₂₁, S₁₂, S₂₂
Dynamic range (10 Hz IFBW)	123 dB/typ. 130 dB (18...36 GHz) 113 dB (36...50 GHz) 107 dB (50...54 GHz)	100 dB, 120 dB typ.	100 dB, 120 dB typ.	100 dB, 120 dB typ.	120 dB	117 dB	120 dB	115 dB	115 dB
Effective directivity	38 dB	35 dB typ.	35 dB typ.	35 dB typ.	30 dB	30 dB	30 dB	30 dB	30 dB
Output power	18...50 GHz: -20...+3 dBm; 50...54 GHz: -20...-3 dBm	30 dB typ. with attenuator +5 dBm typ. (no attenuator); -HP: +15 dBm (no attenuator	30 dB typ. with attenuator +5 dBm typ. (no attenuator); -HP: +15 dBm (no attenuator	30 dB typ. with attenuator +5 dBm typ. (no attenuator); -HP: +13 dBm (no atenuator	on request
Impedance	50 Ω	50 Ω	50 Ω	50 Ω	50 Ω	50 Ω	50 Ω	50 Ω	50 Ω
Connector type	Coaxial NMD 1.85 mm	Waveguide WR15	Waveguide WR12	Waveguide WR12	Waveguide WR8.0	Waveguide WR6.5	Waveguide WR5.1	Waveguide WR4.3	Waveguide WR3.4
For use with Cobalt...	C4209, C4220, C4409, C4420	C4209, C4409	C4209, C4409	C4209, C4409	C4220, C4420	C4220, C4420	C4220, C4420	C4220, C4420	C4220, C4420

* on request.

Obsolete Models

The new models FET-WR15, 12, and 10 (-HP) replace the obsolete models FEV-15, FEV-12, FEV-10.

Model	EOL: FEV-15	EOL: FEV-12	EOL: FEV-10
Frequency range	50...75 GHz	60...90 GHz	75...110 GHz
Test ports	1	1	1
Measured parameters	S₁₁, S₂₁, S₁₂, S₂₂
Dynamic range (10 Hz IFBW)	min.110 dB/typ. 120 dB	min. 100 dB/typ. 110 dB	min 100 dB/typ. 110 dB
Effective directivity	min. 40 dB/typ. 45 dB	min. 40 dB/typ. 45 dB	min 40 dB/typ 45 dB
Impedance	50 Ω	50 Ω	50 Ω
Connector type	SMA (F)	SMA (F)	SMA (F)
For use with Cobalt...	C4209, C4220, C4409, C4420	C4209, C4220, C4409, C4420	C4209, C4220, C4409, C4420
Recommended cal. kit	WR-15	WR-12	WR-10

Accessories for the Copper Mountain Series VNAs

Price on demand

Datasheet_Copper-Mountain_CobaltFx_en.pdf

Datasheet_Copper-Mountaing_Extenders-Assembly-Guide_en.pdf