Acromag IntelliPack T Series Industrial, Isolated Signal Transmitters, Isolators, Splitters
Benefits of the Acromag IntelliPack T DIN-Rail Mountable Transmitters, Isolators, Splitters
- Industrial, rugged, isolated, DIN-rail mountable signal transmitters, isolators and splitters.
- Voltage, current, and sensor inputs.
- Easy configuration with Windows software.
Acromag IntelliPack T Series Industrial, Isolated Signal Transmitters, Isolators, Splitters
These Acromag IntelliPack series modules are industrial, isolated DIN-rail mountabel signal transmitters, isolators, or splitters. They receive DC current, voltage, or sensor input signals, provide isolation, and output proportional DC current or voltage signals. They provide a solution for a wide variety of isolation and signal conversion tasks.
- Various input options for thermocouples, RTDs, voltage, current; 1, 2, or 4 inputs.
- Outputs 0...10 V/0...20 mA or 4...20 mA.
- Models with relay alarm output.
- Universal I/O ranges for a wide bandwith of applications.
- Easy setup with Windows software configuration.
- Push-button calibration simplifies field adjustments for faster and easier maintenance.
- Internal micro controller for intelligent signal processing functions.
- Removable terminal blocks for easy installation of I/O.
Model Overview
| Model | Inputs | Range/type | Outputs | Range/type | Alarm |
| 611T-0500 | 1 | ±100 VDC, 0...100 mADC 0...20 AAC (with optional sensor) | 1 | 0...20 mADC 0...10 VDC | - |
| 612T-0500 | 2 | ±100 VDC, 0...100 mADC 0...20 AAC (with optional sensor) | 2 | 0...20 mADC 0...10 VDC | - |
| 631T-0500 | 1 | 4...20 mADC (4-wire) | 1 | 4...20 mADC | - |
| 631T-0100 | 1 | 4...20 mADC (4-wire) | 1 | 4...20 mADC | - |
| 632T-0500 | 2 | 4...20 mADC (4-wire) | 2 | 4...20 mADC | - |
| 632T-0100 | 2 | 4...20 mADC (4-wire) | 2 | 4...20 mADC | - |
| 633T-0500 | 1 | 4...20 mADC (4-wire) | 2 (splitter) | 4...20 mADC | - |
| 633T-0100 | 1 | 4...20 mADC (4-wire) | 2 (splitter) | 4...20 mADC | - |
| 651T-0600 | 1 | 4...20 mADC | 1 | 4...20 mADC | - |
| 652T-0600 | 2 | 4...20 mADC | 2 | 4...20 mADC | - |
| 653T-0600 | 1 | 4...20 mADC (2-wire) | 2 (splitter) | 4...20 mADC | - |
| 654T-0600 | 2 | ±625 mV, 0...10 VDC (selectable) | 2 | 4...20 mADC | - |
| 655T-0600 | 1 | 2-wire thermocouple type J, K, T, E, R, S, B, N), ±1 VDC, selectable | 1 | 4...20 mADC | - |
| 656T-0600 | 2 | 2-wire thermocouple type J, K, T, E, R, S, B, N), ±1 VDC, selectable | 2 | 4...20 mADC | - |
| 656T-E600 | 2 | 2-wire thermocouples J, K, 0...125 mV (no linearization) | 2 | 4...20 mADC | - |
| 657T-0600 | 1 | RTD: 100 Ω Pt, 120 Ω Ni, 10 Ω Cu selectable | 1 | 4...20 mADC | - |
| 658T-0600 | 2 | RTD: 100 Ω Pt, 120 Ω Ni, 10 Ω Cu selectable | 2 | 4...20 mADC | - |
| 671T-0600 | 1 | 4...20 mADC (2-wire) | 1 | 4...20 mADC | - |
| 672T-0600 | 2 | 4...20 mADC (2-wire) | 2 | 4...20 mADC | - |
| 674T-0600 | 4 | 4...20 mADC (2-wire) | 4 | 4...20 mADC | - |
| 801T-0500 | 1 | Flexible: Thermocouples J, K, T, E, R, S, B, N, RTD Pt, Ni, Cu, ±100 mVDC, 0...500 Ω Input | 1 | 0...20 mADC 0...10 VDC | - |
| 801T-1500 | Mechanic relay, 25 V at 5 A | ||||
| 811T-0500 | 1 | ±100 V or 0...22 mADC (AC current with optional sensor) | 1 | 0...20 mADC 0...10 VDC | - |
| 811T-1500 | Mechanic relay, 25 V at 5 A | ||||
| 841T-0500 | 1 | 0...50 kHz, 0...65535 pulses | 1 | 0...20 mADC 0...10 VDC | - |
| 841T-1500 | Mechanic relay, 25 V at 5 A | ||||
| 851T-0500 EOL/obsolete | 1 | Strain gauges (full-, half-, quarter-bridge), load cells 4-/6-wire, mV | 1 | 0...20 mADC 0...10 VDC | - |
| 851T-1500 EOL/obsolete | Mechanic relay, 25 V at 5 A |
Included: Module, instructions for use.
Frequently Asked Questions:
Question: What are Acromag transmitters used for?
Answer: Acromag transmitters are industrial signal conditioning modules. They are used to connect sensors and field instruments to control systems such as PLCs (Programmable Logic Controllers), DCS (Distributed Control Systems), measurement systems, and displays. Their purpose is to measure, isolate, filter, convert, and monitor process signals in order to ensure data accuracy, protect sensitive equipment, and improve control performance in harsh industrial environments. Acromag transmitters convert raw signals from process sensors (thermocouples, RTDs, voltage, current) into standardized, stable signals (0/4 - 20 mA, 0 - 10 V), while also linearizing and amplifying them. They are designed for decentralized installation, often on DIN rails, and frequently provide galvanic isolation.
Question: Special case – Acromag alarms (limit alarms/modules) – what is special about them?
Answer: These modules monitor a process signal at the module input and trigger a physical relay contact (output) when the signal exceeds or falls below a predefined upper or lower limit. Their primary applications are in process monitoring, safety systems with shutdown functionality, and control of ON/OFF devices.
Question: Special case – Acromag isolators (signal isolators/splitters) – what is special about them?
Answer: These modules provide galvanic isolation between input and output to prevent signal interference and ground loops, and to protect sensitive control room equipment from high-voltage spikes or electrical noise. Their main applications include eliminating ground loop errors in 4 – 20 mA current loops, protecting PLCs from voltage surges, and signal splitting for multiple independent receivers. Types include: 2-wire (loop-powered) versions and 3-/4-wire versions (AC/DC powered) with 3-way isolation (input, output, power supply).
Question: Where are Acromag transmitters typically used?
Answer: In industrial manufacturing and process industries; applications include oil, gas, water treatment, power generation, mining, and manufacturing. They are also used in hazardous environments, as many Acromag products are certified to UL/cUL Class 1 Div 2.
Information on product safety:
Manufacturer:
Acromag, 30765 Wixom Rd, Wixom, MI 48393/USA
www.acromag.com
Responsible person:
Meilhaus Electronic GmbH, Am Sonnenlicht 2, 82239 Alling/DEU
info@meilhaus.com
