Accessories for the Red Pitaya Series
Description
Files/Downloads
Accessories for the Red Pitaya Series
Red Pitaya Extension Modules
Model Overview
| Model | Description | |
| Logic analyzer extension module | IZD00150 | Additional module that turns compatible Red Pitaya devices into an eight-input logic analyzer. The logic analyzer module not only makes it possible to connect the included logic probes, but also protects the Red Pitaya device’s digital inputs from overvoltage. Includes: Logic analyzer board integrated into an aluminum case, 8-cannel logic analyzer probes with cable. |
| LCR meter extension module | IZD00130 | Additional module that turns compatible Red Pitaya device into an LCR meter. The LCR meter module is controlled by an LCR meter app in order to automatically switch between different measurement ranges and perform measurements. It also comes with Kelvin clips. Included: LCR meter board (29.5 cm x 11.5 cm x 3.3 cm; 0.7 kg), ribbon cable, SMA-to-SMA cable, 2x clip probes. |
| Sensor extension module | IZD0017 | The sensor extension module makes it very easy to interface a compatible Red Pitaya device with around 300 different Grove modules, including buttons, relays, LED indicators, sensors for temperature, light, vibration, air quality sensors and many others. The module also provides compatibility with Arduino extension shields. 14 cm x 10 cm x 4.5 cm; 0.1 kg. |
| Vector network analyzer module | IZD0020 | Additional module that turns compatible Red Pitaya device into a vector network analyzer (VNA). The VNA extension module comes with a calibration set in order to properly calibrate the device before performing a measurement. |
Red Pitaya Cases and Heatsinks
Model Overview
| Model | Description | |
| Acrylic case | IZD0009 | Protects STEMlab and SDRlab devices/boards against mechanical damage and influence. The acrylic case is designed in a way that a fan can be mounted on top of it, thus giving additional cooling to the system. The left-hand side of the acrylic case has all the important openingss for the connectors. 12 cm x 7.5 cm x 4 cm; 0.1 kg. Incl. mounting accessories and rubber feet. |
| Aluminum case | IZD0010 | Protects STEMlab and SDRlab devices/board against mechanical damage and influence and takes care of passive cooling. It also has all the important openings for the connectors. 12 cm x 7.5 cm x 4 cm; 0.3 kg. Incl. 4 screws, rubber feet, thermal conductive pad. |
| Heatsink interface | IZD0023 | High quality, passive aluminum heatsink with an adhesive thermal layer, protects Red Pitaya from overheating. Compatible with STEM 125-14. |
More Red Pitaya Accessories
Model Overview
| Model | Description | |
| Diagnostic Accessories kit | IZD0011 | Includes: 2x osciloscope probes, 2x SMA-to-BNC adaptor, 2x 50-Ω termination, 2x SMA T adaptor, WIFI dongle (only for client mode), logic analyzer probes and cable. |
| Impedance transformer | IZD0012 | 14:1 impedance transformer, optimized for connecting 50-Ω RF antennas and pre-amps to the STEMlab 125-10 and STEMlab 125-14 boards. Improves sensitivity and performance. Less than 1 dB insertion loss from 2...50 MHz. |
| Wi-Fi dongle | IZD0038 | Compatible with STEMlab 125-10, STEMlab 125-14, SDRlab 122-16, and SIGNALlab 250-12. Compatible with the latest version of Red Pitaya’s official OS. Dongle enables Red Pitaya unit to connect to other WiFi networks (own network/access point not available). Comes with an RP-SMA detachable antenna, can be extended with a cable for better antenna positioning. Speed 40...50 Mbits/s. |
| Power supply | MAT0021 | For SIGNALlab 250-12; 24 V/1 A interchangeable plug power adaptor; power: 24 W continuous. Rated Input: 100...240 VAC, 50/60 Hz, 0.65 A max. Protection Class II, IP20. |
Customers also bought
