PicoBNC+ Probes, Sensors, etc.
PicoBNC+ Series Automotive Accessories: Probes, Sensors, etc.
The PicoScope 4225A and 4425A automotive oscilloscopes are the first to use the new PicoBNC+ connectivity technology. PicoBNC+ is a plug-and-play connection system for intelligent test probes. PicoBNC+ retains the standard BNC connector, but adds digital and power supply interfaces, as well as reverse polarity protection. The connectors use color coding on the plastic housing. Interactive LEDs on the oscilloscope indicate what is expected from the scope and confirm what is connected. The new probes are automatically recognized by the software and set up accordingly by the oscilloscope. Due to the compatibility of the BNC connector with conventional probes (including those from third party suppliers), all existing conventional BNC probes can continue to be used (without the PicoBNC+ extra functions though).
PicoBNC+ Probes, Sensor, etc.
Model Overview PicoBNC+ Probes, Sensors, etc.
| Model | Description |
| TA396 | PicoBNC+ differential probe 1000 V CATIII |
| TA398 | PicoBNC+ (COP) ignition coil and signal probe |
| TA499 | PicoBNC+ automotive 10:1 test lead and adaptor |
| TA397 | PicoBNC+ secondary ignition voltage pick-up terminal |
| TA432 | PicoBNC+ resistance measuring cable |
| TA395 | PicoBNC+ linear temperature sensor with wide measuring range |
| TA390 | PicoBNC+ WPS500 |
| TA409 | PicoBNC+ current shunt |
| TA410 | PicoBNC+ standard sensor simulator |
| TA497 | PicoBNC+ optical sensor |
Specifications PicoBNC+ TA432 and TA394
| Model | TA432 | TA395 |
| Type | Resistance measuring lead | Temperature measuring lead; unit of measurement °C and °F |
| Total length with cable | 2 m | 2.85 m |
| Max. Voltage and CAT | ±30 V to PC ground, no CAT Class | |
| Range/hardware resolution | 200 Ω: 0.1 Ω 2 kΩ: 1 Ω 20 kΩ: 10 Ω 200 kΩ: 100 Ω 2 MΩ: 1 kΩ (PicoScope 7 only) | 0.5°C |
| Range/hardware accuracy | 200 Ω: 2 Ω 2 kΩ: 20 Ω 20 kΩ: 200 Ω 200 kΩ: 5 kΩ 2 MΩ: 50 kΩ (PicoScope 7 only) | - |
| Diode test | Sends 2 V for diode measurement | - |
| Scaling factors and ranges | Automatic start when measuring resistance with high range. Diode test as separately set range. Default selection is resistance. The automatic range does not include the diode range. | -40...+125°C |
| Calibration/zeroing requirements | Automatic at start | |
| IP class | - | Sensor plus first meter of cable are IP67 |
| Working temperature range | - | -50...+150°C; typ. applications motor temperature: Usually +20...+120°C, temperature of the seat heating: Usually -10...+40°C, air conditioning/heating: Usually 0...+50°C |
Related Products
Customers also bought
