Cleverscope CS548/528/508 USB/LAN High-CMRR PC Oscilloscope
Benefits of the CS548/CS528/CS508 PC Oscilloscope with Individually Isolated Channels
- 30 kV operating isolation voltage to ground and other channels (remote IsoPod).
- 100 dB common mode rejection ratio (CMRR) at 50 MHz.
- 14 bit resolution, 100 dB dynamic range.
Cleverscope CS548/CS528/CS508 USB/LAN High-CMRR PC Oscilloscope
The Cleverscope CS548 is a PC oscilloscope with 4 high CMRR individually isolated channels. The unit is also availabel with fewer channels: Version CS528 with 2 internal channels and version CS508 with no internal channel. The version CS508 is designed for use with 1 to 4 external CS1200 remote digitizers. The CS5x8 can be used to measure the signals in an operating full or three phase power electronic switching bridge on both the low and high sides, such as gate drives to measure voltage and charge, the power switch to measure loss and parasitic stress, the output to measure power and spectrum for EMC compliance, and the control system for Gain/Phase and stability. The Cleverscope CS548/CS528/CS508 also offer an isolated signal generator for stimulus, and two expansion pod connectors for isolated input and output functions. Two CS5x8s can be linked/slaved to create an up to 8 channel oscilloscope.
- 2 or 4 internal isolated analog oscilloscope channels and 8 digital MSO inputs.
Version with no internal analog channels for use with 1 to 4 external CS1200 remote digitizers. - 14 bit resolution, 100 dB dynamic range.
- 200 MHz analog bandwidth.
- Pod 1, 2 expansion: 5x bidirectional 400 Mbps LVDS channels per pod.
- Pulse generator/calibration.
- Isolated 65 MHz signal generator (sine, square, arbitrary, incl. patterns); 100 dB CMRR at 50 MHz.
- Digital port: 16 bi-directional pins.
- Interface: USB 2.0 and 3.0, Ethernet copper 10/100/1000 Mbps, fiber 1 Gbps.
- Link in/out used to daisy chain multiple units.
- Link port links to CS1070 0...50 MHz 1 A power amplifier, CS1133 VSat probe.
- SD card slot to store stand-alone captures.
Model Overview
| Model | Cleverscope CS548 | Cleverscope CS528 | Cleverscope CS508 |
| Internal analog channels | 4 | 2 | No internal channels, designed for use with 1 to 4 external CS1200 remote digitizers |
| Isolation | 2 kVDC, 1 kVAC CAT II, 600 VAC CAT III operating isolation voltage to ground and other channels (local). 30 kV operating isolation voltage to ground and other channels, via CS1200 remote probe. 100 dB CMRR at 50 MHz | ||
| Bandwidth | 200 MHz | ||
| Sample rate | Up to 500 MS/s | ||
| Memory depth | Max. 500 MS | ||
| Resolution | 14 bit | ||
| Triggering | Two FPGA mixed signal triggers. Triggers interpolate in time for higher trigger accuracy. Triggers may be combined using AND/OR/XOR. The analog trigger may be conditional on a digital state | ||
| Digital MSO channels | 8 inputs | ||
| Signal generator | DC...65 MHz; isolated 600 V working; 100 dB CMRR at 50 MHz; waveforms: Sine, square, arbitrary (incl. patterns) | ||
| Additional I/O | Probe compensator output (1 kHz square wave); digital port (16 I/O lines); link port to control accessory devices | ||
| Interfaces | USB 2.0 and 3.0 Ethernet copper 10/100/1000 or Ethernet fiber 10000Base-LX link in/out port used to daisy-chain 2x, 3x, or 4x CS548 SD card slot | ||
| Power supply | External power supply 10...24 VDC | ||
| Dimensions (mm) | 69 x 187 x 280; approx. 2.8 kg | ||
Note for some functions "coming soon": Hardware is implemented, but software function will be delivered by firmware update when done. See "specification status" in the data sheet or call.
Information on product safety:
Manufacturer:
Cleverscope Ltd, Level 2, 101 Mt Eden Road, Mt Eden, Auckland 1025/NZL
www.cleverscope.com
Responsible person:
Meilhaus Electronic GmbH, Am Sonnenlicht 2, 82239 Alling/DEU
info@meilhaus.com
Related Products
