Siglent ODP6000B Series Opto-Isolated Differential Probe
Siglent ODP6000B Series Opto-Isolated Differential Probe
The Siglent ODP6000B series are optical isolated voltage probes with remarkably high CMRR. The CMRR of traditional differential probe decreases fast in high-frequency range, as a result, measuring the small voltage signal waveform (e.g., the driving voltage when measuring the upper MOSFET of the half-bridge circuit) under high CM interference voltage accurately become an extremely hard task. ODP6000B series applies optical isolation technologies and gains remarkably high CMRR in all working bandwidth.
- 2 chargeable batteries that can be replaced to keep the probe work continuously.
- Can be calibrated and zeroed online without disconnecting from the tested equipment.
- Multiple attenuators available, able to meet the measurement requirement of different voltage.
- Extremely high CMRR.
- Bandwidth over 1 GHz.
- Isolation voltage over 60 kV.
- High accuracy and stability in wide temperature range.
- Smaller size.
- Application: R&D, debugging or maintenance of switching power supply, motor driver, new energy inverter, converter, LED power supply, household appliances and other electrical power devices, floating signal test, measure the gate voltage drive of power devices like Si/SiC/GaN, small signal measurement of differential mode under high common mode voltage.
Model Overview
| Model | Description | |||
| ODP6050B | Optical isolated differential probe | 500 MHz, 50X, max. differential test voltage (DC + peak AC) ±25 V, isolated voltage ±60 kV | DC 5 V adaptor or 7.4 V battery power supply | Standard 50X/1000X/2000X/5000X attenuator |
| ODP6100B | Optical isolated differential probe | 1 GHz, 50X, max. differential test voltage (DC + peak AC) ±25 V, isolated voltage ±60 kV | DC 5 V adaptor or 7.4 V battery power supply | Standard 50X/1000X/2000X/5000X attenuator |
| CK-AT5X-2 | Connector type SSMB. Measurement range ±2.5 VPK. Input impedance 1 MΩ||28 pF | Attenuation ratio 5:1 | ||
| CK-AT10X-2 | Connector type SSMB. Measurement range ±5 VPK. Input impedance 1 MΩ||6 pF | Attenuation ratio 10:1 | ||
| CK-AT20X-2 | Connector type SSMB. Measurement range ±10 VPK. Input impedance 5 MΩ||6 pF | Attenuation ratio 20:1 | ||
| CK-AT50X-2 | Connector type SSMB. Measurement range ±25 VPK. Input impedance 10 MΩ||4 pF | Attenuation ratio 50:1 | ||
| CK-AT100X-2 | Connector type SSMB. Measurement range ±50 VPK. Input impedance 10 MΩ||2 pF | Attenuation ratio 100:1 | ||
| CK-AT200X-2 | Connector type SSMB. Measurement range ±100 VPK. Input impedance 10 MΩ||2 pF | Attenuation ratio 200:1 | ||
| CK-AT500X-2 | Connector type 2.54 mm socket. Measurement range ±250 VPK. Input impedance 10 MΩ||2 pF | Attenuation ratio 500:1 | ||
Included: Optical isolated differential probe ODP 6050B or 6100B, 1x 50X attenuator (CK-AT50X-2), 2x SSMB male socket to DuPont cable connector (CK-321), 10x SSMB male socket (CK-23), 1x USB power supply cable Type-C 1.5 m (CK-314A), 2x power supply adaptor 5 V/2 A (CK-605), 1x OE transmitter support frame (CK-690A), 1x BNC male to SSMB male (CK-25), 3x input extension cable (CK-322), 1x output extension cable (CK-325), 1x battery charger set (CK-691), 1x instruction manual, 1x warranty card, 1x test report.
Information on product safety:
Manufacturer:
SIGLENT Technologies CO., LTD., Blog No.4 & No.5, Antongda Industrial Zone, 3rd Liuxian Road, Bao’an District, Shenzhen, 518101/CHN
www.siglent.com
(EU branch Germany)
